Product ID:MS-400L BASE COMPONENT PART A
MSDS Date:04/28/1995
FSC:8010
NIIN:00N064004
MSDS Number: CFRVP

AMERICAN SAFETY TECHNOLOGIES INC

565 EAGLE ROCK AVE
ROSELAND, NJ 07068
US

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 201-403-2600

Preparer: J HERMELE

Cage: AMSAT

AMERICAN SAFETY TECHNOLOGIES INC.

ROSELAND, NJ 07068 US

Telephone: 800-424-9300

Cage: AMSAT

BISPHENOL A-EPICHLOROHYDRIN COPOLYMER; (EPOXY RESIN). LD50

CAS: 25068-38-6

RTECS: SL6475000

Fraction By Weight: 10-20%

OSHA PEL N/K

ACGIH TLV: N/K

DIPROPYLENE GLYCOL DIGLYCIDYL ETHER; (POLYGLYCOL EPOXY

CAS: 41638-13-5

Fraction By Weight: <3%

OSHA PEL N/K

ACGIH TLV: N/K

BARIUM SULFATE

CAS: 7727-43-7

RTECS: CR0600000

Fraction By Weight: 20-35%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9495

WOLLASTONITE; (CALCIUM METASILICATE)

CAS: 13983-17-0

RTECS: ZC9750000

Fraction By Weight: <3%

OSHA PEL 10 MG/M3 (MFR)

ACGIH TLV: 10 MG/M3 (MFR)

ALUMINUM (SARA 313)

CAS: 7429-90-5

RTECS: BD0330000

Fraction By Weight: 20-35%

OSHA PEL 15 MG/M3 DUST

ACGIH TLV: 10 MG/M3 DUST; 9495

XYLENE (SARA 313) (CERCLA)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: <4%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM/150STEL;9495

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

2-PROPANOL, 1-ETHOXY-; (1-ETHOXY-2-PROPANOL)

CAS: 1569-02-4

RTECS: UB5250000

Fraction By Weight: <3%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM/150STEL;9495

SOLVENT NAPHTHA (PETROLEUM), LIGHT AROMATIC; (AROMATIC

CAS: 64742-95-6

RTECS: WF3400000

Fraction By Weight: <0.5%

OSHA PEL 100PPMTWA (MFR)

ACGIH TLV: 100PPMTWA (MFR)

MILLED GLASS 9007 1-32; (AMORPHOUS GLASS OXIDE)

CAS: 65997-17-3

Fraction By Weight: <4%

OSHA PEL 100PPMTWA (MFR)

ACGIH TLV: 100PPMTWA (MFR)

LD50 LC50 Mixture:SEE INGREDIENT 1
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: IRRITANT. AGGREGATE MAY CAUSE
INJURY. SKIN: MAY CAUSE MODERATE IRRITATION AND SENSITIZATION.
INHALATION: VAPORS MAY CAUSE HEADACHES, NAUSEA, DIZZINESS AND
RESPIRATORY IRRITATION. INGESTION: NO S PECIFIC INFORMATION
AVAILABLE. CONTAINSMATERIALS THAT MAY BE SLIGHTLY TOXIC.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:IRRITATION, SENSITIZATION AND DERMATITIS.
Medical Cond Aggravated by Exposure:ALLERGY, ECZEMA AND OTHER SKIN
CONDITIONS.

First Aid:EYES: FLUSH WITH LARGE QUANTITIES OF WATER FOR AT LEAST 15
MINUTES. GET MEDICAL ATTENTION. SKIN: REMOVE CONTAMINATED CLOTHING.
WASH CONTACT AREA WITH MILD SOAP AND WATER. INHALATION: REMOVE TO
FRESH A IR. GIVE OXYGEN IF BREATHING IS DIFFICULT. GET MEDICAL
ATTENTION. INGESTION: DO NOT INDUCE VOMITING (CONTAINS SOLVENT).
GET MEDICAL ATTENTION.

Flash Point Method:SCC
Flash Point:>100F,>38C
Lower Limits:1.62%
Upper Limits:11.8%
Extinguishing Media:DRY CHEMICAL OR CHEMICAL FOAM.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . REMOVE ALL IGNITION SOURCES.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY RUPTURE (DUE TO
BUILD UP OF PRESSURE) WHEN EXPOSED TO EXTREME HEAT. DECOMPOSITION
AND COMBUSTION PRODUCTS MAY BE TOXIC.

Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES. DIKE SPILL.
ABSORB WITH INERT MATERIAL AND COLLECT FOR DISPOSAL. FLUSH
CONTAMINATED AREA WITH WATER; PREVENT WASHINGS FROM ENTERING
WATERWAYS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:AVOID ALL PERSONAL CONTACT. DO NOT
EXCEED 100F/43C IN STORAGE AREA. GROUND AND BOND METAL CONTAINERS
FOR LIQUID TRANSFER TO AVOID STATIC SPARKS.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:NIOSH APPROVED RESPIRATOR WITH ORGANIC VAPOR
CARTRIDGE IF REQUIRED.
Ventilation:EXPLOSION-PROOF MECH VENT & LOC EXHST ARE REC. MECH EXHST
IS NOT REC AS THE SOLE MEANS OF CONTROLLING EMPLOYEE EXPOS.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:ANSI APPRVD EMER EYE WASH & DELUGE SHOWER .
IN OPERATIONS WHERE CONTACT MAY OCCUR, COVERALLS, APRON & (SUPDAT)
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
OTHER PROT EQUIP:IMPERVIOUS FOOT COVERING ARE RECOMMENDED.

Boiling Pt:B.P. Text:>240F,>116C
Vapor Pres:8 @ 68C
Vapor Density:3.1
Spec Gravity:2.3 (H*2=1)
Evaporation Rate & Reference:0.7 (BUTYL ACETATE =1)
Solubility in Water:SLIGHT
Appearance and Odor:PIGMENTED VISCOUS LIQUID, MILD ODOR.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:EXCESSIVE HEAT.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE AND
ALDEHYDES.

Waste Disposal Methods:THIS PRODUCT, IF DISPOSED AS SHIPPED, MEETS EPA
CRITERIA OF A HAZARDOUS WASTE AS SPECIFIED IN 40 CFR 261 ON THE
BASIS OF ITS IGNITABILITY. DISPOSE OF IN A LICENSE HAZARDOUS WASTE
FACILITY IN ACCORDANC E WITH FEDERAL, STATE AND LOCAL LAWS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.